Forums > Sailing General

Bum clean and anti foul

Reply
Created by MorningBird > 9 months ago, 2 May 2017
twodogs1969
NSW, 1000 posts
3 May 2017 5:04PM
Thumbs Up

Select to expand quote
Lenn said..


sirgallivant said..
Capt. Cook is 16m on the centre span.
However, Tom Ugly's is only 6,5m.





tight squeeze;

Mast Height from DWL: 54.75' / 16.69m



Speak to grant at ems you might be ok on dead low.

If you can't fit another option is ian ford has brought the yard next to Lewis in Wollaware not sure of the name of it but have heard he is very cheap.

MorningBird
NSW, 2698 posts
3 May 2017 9:02PM
Thumbs Up

Select to expand quote
BJRobinson said..

Sectorsteve said..


BJRobinson said..
Just got a price for my E26, no prop, at Marmong Point Marina in Lake Mac for me to do it myself.
$286 total lift in and out.
$94 for them to jet wash
$33 environmental levy
$54 per day stand hire
$205 for 4L antifoul. Forgot ask what brand. They said 4L should do it.

So a total of $780 for 3 days on the stand. Thought I would sand and paint the deck at the same time.

Don't need to do it just yet. But wanted to know how much to save up.




thats pretty good

the cheapest we heard of nearby on the nsw coast is Ulladulla and Tea Gardens. you gotta be a rate payer of the Nelson bay area to use tea gardens slip.

im gonna give the boat a good scrub - well scrape these days, before leaving for north and have organised with nsw sailor to do mine in laurieton. Similiar prices as Marmong. Gotta be done. Still got a few litres of antifoul left. 200 for 4 litres sounds a bit cheap BJ. I hear you shouldnt use anything crap. Wont work. Ive only used and only use international.



Thanks Sector Steve
I will make sure it is a quality brand when I need to do it.
I was actually told to make sure it is the same brand as exists on it now. But I am guessing it won't matter much if it is almost all gone after the pressure clean.


Also budget for protective clothing. I haven't done my own but I understand antifoul application can be hazardous.

BJRob
NSW, 251 posts
3 May 2017 9:21PM
Thumbs Up

Select to expand quote
MorningBird said..

BJRobinson said..


Sectorsteve said..



BJRobinson said..
Just got a price for my E26, no prop, at Marmong Point Marina in Lake Mac for me to do it myself.
$286 total lift in and out.
$94 for them to jet wash
$33 environmental levy
$54 per day stand hire
$205 for 4L antifoul. Forgot ask what brand. They said 4L should do it.

So a total of $780 for 3 days on the stand. Thought I would sand and paint the deck at the same time.

Don't need to do it just yet. But wanted to know how much to save up.





thats pretty good

the cheapest we heard of nearby on the nsw coast is Ulladulla and Tea Gardens. you gotta be a rate payer of the Nelson bay area to use tea gardens slip.

im gonna give the boat a good scrub - well scrape these days, before leaving for north and have organised with nsw sailor to do mine in laurieton. Similiar prices as Marmong. Gotta be done. Still got a few litres of antifoul left. 200 for 4 litres sounds a bit cheap BJ. I hear you shouldnt use anything crap. Wont work. Ive only used and only use international.




Thanks Sector Steve
I will make sure it is a quality brand when I need to do it.
I was actually told to make sure it is the same brand as exists on it now. But I am guessing it won't matter much if it is almost all gone after the pressure clean.



Also budget for protective clothing. I haven't done my own but I understand antifoul application can be hazardous.


Thanks.
So no stubbies and tank top.

cisco
QLD, 12361 posts
3 May 2017 11:51PM
Thumbs Up

Those paper disposable overalls that painters and forensic people use are fairly cheap. Any work clothing shop would have then for about $20 I think.

Lenn
NSW, 174 posts
4 May 2017 6:49AM
Thumbs Up

Select to expand quote
twodogs1969 said..


Lenn said..




sirgallivant said..
Capt. Cook is 16m on the centre span.
However, Tom Ugly's is only 6,5m.







tight squeeze;

Mast Height from DWL: 54.75' / 16.69m





Speak to grant at ems you might be ok on dead low.

If you can't fit another option is ian ford has brought the yard next to Lewis in Wollaware not sure of the name of it but have heard he is very cheap.



i will try Ian...what is his company name.?doubt i would risk getting under at low as that would then present a worry navigating into Kogarah bay, i am not familiar with that area at all depth wise

twodogs1969
NSW, 1000 posts
4 May 2017 7:36AM
Thumbs Up

Select to expand quote
Not sure I think it is South side
Phone
(02) 9540 3287

Another option is go for a drive they are in Mangrove lane you could even try Lewis's.

Lenn
NSW, 174 posts
4 May 2017 7:53AM
Thumbs Up

Select to expand quote
twodogs1969 said..




Not sure I think it is South side
Phone
(02) 9540 3287

Another option is go for a drive they are in Mangrove lane you could even try Lewis's.





yep right next door...do they have a lifting facility, i might take a drive down there, it is pretty gnarly around there tidal wise, i know the old Lewis site is very $$ now they have changed hands and upgraded etc






Subscribe
Reply

Forums > Sailing General


"Bum clean and anti foul" started by MorningBird