Hi anyone got any links to someone that might sell a solid 3D printed wing harness hook.
There was a guy in WA that was selling some but can't find his link.
Otherwise am I better going to a shop and ordering a moulded one.
Any suggestions shop brand etc.
Thanks
if you are in printing; www.thingiverse.com/rolfjoosten/designs I?m using a harness with wing, greate thing, makes it easy to hook/unkook because its a bit higher up on breast-level: www.flygroove.it/prodotto/trapezio-g-hook-aqua/ my model is without drinking bag, the new one is with and more expensive...
Select to expand quoteodrx said..
if you are in printing; www.thingiverse.com/rolfjoosten/designs I?m using a harness with wing, greate thing, makes it easy to hook/unkook because its a bit higher up on breast-level: www.flygroove.it/prodotto/trapezio-g-hook-aqua/ my model is without drinking bag, the new one is with and more expensive...
good to see more options for chest harnesses...here is another:
rideengine.com/collections/wing-foil-harnesses/products/free-float-wingsurf-chest-harness
and another:
northshoreinc.com/shop/wing/wing-harnesses/nsi-wing-chest-harness/
I use one of these that someone 3d printed for me. Works great for 2 years now. drive.google.com/drive/folders/1x1AA6eGohYQb9ZBhAxPsAh-dW2yK9p-w
Select to expand quotedkeating said..
Hi anyone got any links to someone that might sell a solid 3D printed wing harness hook.
There was a guy in WA that was selling some but can't find his link.
Otherwise am I better going to a shop and ordering a moulded one.
Any suggestions shop brand etc.
Thanks
I am using this with my Armstrong belt leash
rideengine.com/products/the-nug?srsltid=AfmBOooKyqTbXvWQfhbAvsjMupMfNO_KX2bHjOyjnXXgV1MvlHJJOoh8
The Ozone Hook is super high quality and cheap: www.silentsports.com/products/ozone-harness-hook?srsltid=AfmBOoo8Tw1cExmlNjNuDLXiltmx1itK--eeKWGbimk26mjy7iSYpqR1
I made my own out of a $12 plastic cutting board using a jigsaw. I have a lifetime supply of replacements with the remainder of the cutting board.
Select to expand quotedkeating said..
Hi anyone got any links to someone that might sell a solid 3D printed wing harness hook.
There was a guy in WA that was selling some but can't find his link.
Otherwise am I better going to a shop and ordering a moulded one.
Any suggestions shop brand etc.
Thanks
shepherdwatersports.etsy.com/listing/1788724368
Select to expand quoteWindbot said..
I made my own out of a $12 plastic cutting board using a jigsaw. I have a lifetime supply of replacements with the remainder of the cutting board.
I did this too. Printed one from thingyverse but it broke so I traced it into smallest white plastic cutting board and cut it out.
I designed and use this one. www.thingiverse.com/thing:6529735
Happy to print you one if you are in Sydney.
One thing to be aware of with the printed and home made options is the width of the hook and the size of the belt opening.
I've used a printed one where the belt space was way too wide and long and the whole hook twisted into awkward positions as a result.
The better hooks are wider than a cutting board AND have a small and tight opening for the belt. This means you can still move it out of the way easily but it's stays in place during use and doesn't ride up or twist awkwardly.
Select to expand quoterseeg said..
I designed and use this one. www.thingiverse.com/thing:6529735
Happy to print you one if you are in Sydney.
Thanks - printed one and it works really well, I like the fact that it does not stick out alot but is still easy enough to hook into.
Its really not worth messing around. Ive done the cutting board thing and it worked but Michael Shepherds are brilliant and fit most waist harness belts that i know of. Well worth it, fully recommend
shepherdwatersports.etsy.com/listing/1788724368
