Can anyone tell me where in sa i would be likely to get some high density foam,not after a blank,more in the line of some strips around 50mm thick?
Hi Steve
There is a company is the same complex as Glascraft that specialises in foam. I can't rememeber it's name. I've brought a lot foam off his guy. He sells lots of different types. He cuts it to size. Hope that helps.
Ja
I couple of month's ago I got a big piece of S type styrene from Foamex SA, 8-10 Waldaree St, Gepps Cross 8359 0182. They cut to size. Hope this helps.
Clark Rubber just around the corner from Glascraft, they have lots of nice foam products
has anyone had any experience with making there own waveboards? Thought it might be a bit of fun to have a go.
Any thoughts on where to source the mast track and fin box?
Cheers Muzza
Should be a bit of fun experimenting with a few different shapes. Hope your foot goes well on the weekend if the wind comes in.
GOOD LUCK MCFLYING.I'm not game enough to start from scratch,just been experimenting with removing the fibreglass top and timber laminate bottom from a old wave energy board ,thumbs up its coming off well.then shaping various areas to get what I'm after.
Cheers muzza,
I need a board for Vikki to use, so i'm thinking about basing a design on the 101L freewave I've got but changing the rails to make it bottom turn a bit better.
How did the foot go sailing again, i hope its still attached below your ankle somewhere.
