Forums > Windsurfing Gear Reviews

DaKine contour footstraps

Reply
Created by decrepit > 9 months ago, 8 Jan 2006
decrepit
WA, 12767 posts
8 Jan 2006 7:43PM
Thumbs Up

John from seabreeze talked me into trying out these foot straps, I'm a bit of a tight a---, wouldn't normally spend that much for 3 straps, but it was Xmas money, so what the hell!
Tried them out the last 2 days. Fantastic!!! well worth the extra, super comfortable, great grip, but easy to get out of. Reasuring in the waves, no tendency for back foot to come out in jumps, even thou strap was loose for bottom turns.
Because of the contours, (cone shaped to fit your feet) they grip over the whole strap width, not just the front edge. They stay upright, and don't flop down, making them easy to get into.
Only possible disadvantage I can see, is ease of adjustment. That has to be done with a philips screwdriver, (undo the screws and change mounting holes in strap)

kitingkook
NSW, 109 posts
11 Jan 2006 12:26PM
Thumbs Up

Best straps avaliable

sinker
WA, 255 posts
11 Jan 2006 1:37PM
Thumbs Up

A timely post Decrepit.....

I got massive blisters last year off the footstraps on my acid, changed the straps to some old crappy ones and problem solved.

Only thing is I re-fitted the standard Starboard ones again when I was intending to sell the board .....didn't sell it ..... forgot about the horrible straps...limping around like a bas*ard after 2 big sessions recently.

How much are those straps?

decrepit
WA, 12767 posts
11 Jan 2006 9:02PM
Thumbs Up

Sorry, figures don't stay in my head very long these days, I think I payed $84, my wife thinks $89, for the set of 3.
one thing that fooled me, is the stainless steel plates, that fit between the plastic top caps and the strap. the plates were attached to the double screw caps, and I was using the single screw caps. Didn't work out that I had to remove the plates from the double caps and fit to the single, untill I had fitted all 3 straps. I overtightened the last screw, and blew the bottom out of the plastic, can't happen if the plate is there!

sinker
WA, 255 posts
13 Jan 2006 2:02PM
Thumbs Up

clear as mud...

I'll work it out....Thanks mate

decrepit
WA, 12767 posts
13 Jan 2006 9:58PM
Thumbs Up

Didn't think I was making much sense, but it'll become clear as soon as you open the packet. Just make sure the stainless plates are under the plastic bits that you use, not the plastic bits left lying on the bench!

Think I'll have to get a job, talking in riddles.

rgeerdink
NSW, 34 posts
15 Jan 2006 8:31PM
Thumbs Up


When I first bought the DaKine contour footstraps I was really pleased with them. I bought a pair for each of my 2 boards. A year or so later I was very disappointed to find that they did not last very long. The plastic pieces crack and snap very easily and I have so far torn three of the 6 straps.

Has anyone experienced something similar?

Cheers,
Rob

decrepit
WA, 12767 posts
15 Jan 2006 9:17PM
Thumbs Up

That's interesting, hope mine last longer than that.
Do you have the stainless steel plates under the plastic pieces???

John said when he sold them to me, that he'd had one set last 3 boards, mind you, he didn't say how often he changed his boards.

rgeerdink
NSW, 34 posts
16 Jan 2006 8:12PM
Thumbs Up

No I do not remember the steel plates. Hopefully that does the trick. Please let me know how things work out with them as I would love to get another set if they no longer break.

Have fun on the water

Cheers,
Rob

decrepit
WA, 12767 posts
18 Jan 2006 9:16PM
Thumbs Up

I didn't notice them either, until I overtightened one of the screws and broke the plastic! Had a look at the double screw plastic bits to see if I could use that in some way, and low and behold, all the "doubles" had plates under them. Instructions doesn't mention them, so I suspect a few people who are just using a single screw, have made the same mistake.

So how long do you think it'll be before we know if this is the answer????
Perhaps you'd better remind me when you think the time's come, because I'm sure to forget!!!!!

elmo
WA, 8868 posts
18 Jan 2006 9:42PM
Thumbs Up

try sending an email to Dakine, they'l probably respond fairly quickly with proper fitting instructions

decrepit
WA, 12767 posts
18 Jan 2006 10:08PM
Thumbs Up

What?? And spoil all the fun!!!

AUS154 Chris
QLD, 217 posts
19 Jan 2006 8:08AM
Thumbs Up

The starboard racestraps are worth a go, though could be overkill on a wave board. Best stock straps I've found so far were the ones that came on my JP supercross. Very comfortable and durable.

JV
WA, 65 posts
19 Jan 2006 3:14PM
Thumbs Up

wait until winter... the rubber is nice and comfy in the warm weather but goes really hard in the cold! Tears nice chunks out of your feet.

AUS154 Chris
QLD, 217 posts
19 Jan 2006 10:02PM
Thumbs Up

Which ones you talkin bout JV?

JV
WA, 65 posts
21 Jan 2006 7:00PM
Thumbs Up

the dakine contour straps. I reckon I've got about 7-8 sets of them kicking around the shed somewhere... should go find 'em and give them to some of these crew that like them.
I found them fine when I was sailing in Maui a lot, but over here they kill me.

decrepit
WA, 12767 posts
21 Jan 2006 7:24PM
Thumbs Up

quote:
Originally posted by JV


I found them fine when I was sailing in Maui a lot, but over here they kill me.


So where's overhere??? Tassy I hope, but there again the board I've put them on is mainly a summer board, I'll try it in winter and see how they feel.

JV
WA, 65 posts
23 Jan 2006 9:12AM
Thumbs Up

Nah - I'm in Perth. And I reckon the winters here are actually pretty bloody cold!! None of my mates in the Europe seem to believe that, though...



Subscribe
Reply

Forums > Windsurfing Gear Reviews


"DaKine contour footstraps" started by decrepit