HEY thats my board !
How did you get in our garage Keith? 
Just went and checked if it was still there,you should have taken it while you had the chance !
Seeings I'm the only person to have ridden that board you will have to take my word on how she goes....
FAST 2sec and 5x10 PBs 2 days in a row and more tomorrow
Select to expand quoteKimba said..
Hey Keef, is it a custom or modified production board?
Looks FAST whatever it is.
kimba its a production, originally 48 wide so when routed it still has a good bit of width and volume at the mast track area , the fin has a 47deg rake and forward boxed so has a good bit of surface area and absolutely hoots to windward for a weed speed fin
Select to expand quoteAUS2001 said..
HEY thats my board !
How did you get in our garage Keith?
Just went and checked if it was still there,you should have taken it while you had the chance !
Seeings I'm the only person to have ridden that board you will have to take my word on how she goes....
FAST 2sec and 5x10 PBs 2 days in a row and more tomorrow
alex don't tell me someone has knicked my board hey how good is that jump and who said you cant jump narrow tail boards 
My question is, how does it gybe?
The board I made like that is horrible to gybe, but I started the cutouts a lot further forward, I keep meaning to bring the cutouts back to the front foot strap and see if that improves things.
Select to expand quotedecrepit said..
My question is, how does it gybe?
Perfectly ,maybe not so good with Keith on it
Select to expand quoteAUS2001 said..
HEY thats my board !
How did you get in our garage Keith?
Just went and checked if it was still there,you should have taken it while you had the chance !
Seeings I'm the only person to have ridden that board you will have to take my word on how she goes....
FAST 2sec and 5x10 PBs 2 days in a row and more tomorrow
Well obviously, it Flies!!
Select to expand quotedecrepit said..
My question is, how does it gybe?
The board I made like that is horrible to gybe, but I started the cutouts a lot further forward, I keep meaning to bring the cutouts back to the front foot strap and see if that improves things.
mike I haven't ridden the board, Arky has and he thought the board would be a handful in chop but was a bit surprised , as far as alex goes I cant get the board off him, I think he did say he could feel the outer rail catching going to windward but he was really pushing it , the wake looks nice and narrow and clean so should be great in really flat stuff
sanctuary point isn't the best place to test a flat narrow board because 95%of the time your sailing good size chop with a really short spat in the weeds , its a credit to Alex because he looks so much in control and is also getting some huge air time
the answer to your 
is this board is really chunky in the mast track area ,so the board is flattening out and has floatation at the wide section of the cutout in the jibe , ill get muddskipper to give it a test run tomorrow , that's if he can get it off Alex
Hahaha, don't like my chances. Maybe after I crack out some big speeds on the slalom board I can steal it off him, I'll need a bit more wind than Alex though seeing as I'm probably 40kg heavier. Should have my new fin there to. How long before epoxy is fully hardened 18hrs?
paul i'm with you ill be waiteing for some flat at primbee
looks like your stuck with my fin for one more sail , epoxy is funny stuff with this weather it could be ok but I wouldn't be pushing your luck
The board goes great in chop.I didn't go up to the smooth water of the weed beds while riding it .My fastest run of the day was in the chop with that board and was faster than the CA55 I rode in the smooth water.I will try it in the smooth water tomorrow.
You keep off that board Mudwrecker !
Everyone else packs their windsurfing gear in their car when they have finished sailing for the day,yours goes in the bin.Select to expand quotekeef said..
Mudskipper I wouldn't be pushing your luck
What luck ! Lucky if it breaks near the shore so he doesn't have to swim so far to the bin
Your just jelous Arky that I hold the Basin Speed record... I'll take it easy for a while to try let you catch up :P
jumping the board is the easy part - its the landing thats the issue with those deltas!
Select to expand quoteRoar said..
jumping the board is the easy part - its the landing thats the issue with those deltas!Select to expand quoteRoar said..
jumping the board is the easy part - its the landing thats the issue with those deltas!
roar the fin is a 18cm weed speed 47deg , its the top middle fin , nice thick chunky base and thinner for the last 1/3rd, you cant use deltas at sanctuary point because of the chop, its like sailing primbee in a southerly where your sailing out into the chop and only a a squirt in at the shallows on the way back
decrepit the wide base fin is yours before I built the leading edge up
