Hey All,
I have used my watch twice but each time I try to down load it tells me there is no data.
It logs something as it is showing me the stats i.e fastest time etc...
When the file downloads to my PC file GSPLOG .SBP the file is only 1 or 2 KB
What am I dong wrong???
Any help appreciated
Cheers
Just because the display is working doesn't mean it's logging.
Check you settings, logging should be set to 5hz. And min speed a very low number, ie 0 - 5 kts. Personally I think 5 is way too high I'm still sailing at that speed.
Thanks for the reply,
Logging was on x, I assume that means nothing. I have reset to 5hz and 1 Kn min speed.
Will try again Cheers
yep, for some reason the default logging is usually x=off.
So if you haven't read the manual, there's some good advice in there.
Wash in fresh water after every sail. it helps stop corrosion on the connectors.
DO NOT press any of the buttons while they are wet. Pressing buttons allows the watch to "vent". If the watch is cold and it vents anything around the buttons gets sucked in. Salt water will corrode the button contacts, rendering them inoperative.
