Forums > Windsurfing General

carbon masts

Reply
Created by nerdycross > 9 months ago, 24 Dec 2015
nerdycross
317 posts
24 Dec 2015 3:10PM
Thumbs Up

Help needed
I'm totally confused with the advise for different types of of mast for my quiver .I have a tushingham bolt 5.2 and a severne 6 ncx that I'm using a north viper %100 sdm. Also have a severn e 7 ncx and a T4 8mtr that I use a tushingham 460 %100 sdm.
Had mixed advice on what is suitable for the 7 ncx and T4 .would It be better suited to change my 460 tush for a uni fiber or a north sdm ?I believe my 430 viper is fine for the bolt and 6 mtr ncx..? (Severne masts to expensive )
Help !

Tardy
5262 posts
24 Dec 2015 5:15PM
Thumbs Up

Yeah you've got a real mixture ...tushingham .will work with most north sail mast .but don't get rid of the viper 100 ..great mast ..the 430 viper will probably be to soft for the severne sails ..they like a hard top not a constant curve like north and Tushingham .
Other mast that are suitable for your Severne sails are either Naish and Gaastra .Both hard tops ..I also have some ncx sails and I use the 90% naish mast on them .work perfect .was using the north mast on them but lost all the power of the sail and didnt get any performance out of them .uni fibres are ok ..( cheap).but don't have the quality of the north or severne or tushingham mast ..
T4s great sails.
shop around for a second handie.
tardy

nerdycross
317 posts
24 Dec 2015 6:28PM
Thumbs Up

Thanks for info Tardy your right about the north mast it's real good and seams to work on bolt and 6mtr severne but no sure about the tush on that 7mtr severne.

Tardy
5262 posts
24 Dec 2015 7:18PM
Thumbs Up

It Will work ..ok ....as mine did ..but was just too soft ...it wasnt till I used the correct stiffer mast that I got the full power out of the sail ..
the top end of the sail increased by 45% more speed ..it was great.

I ve mixed up my sails a bit to so have to carry both masts types..

tushingham ,ezzy ...sails. north mast and ezzy .

naish ,severne sails ....Naish mast ...


Mark _australia
WA, 23458 posts
24 Dec 2015 9:11PM
Thumbs Up

I know it is not much help but you do need to rationalise the quiver a bit, try and pick a brand. Tush is a bit tip flex, and Severne a bit hard top. Cambered sails particularly need curve and dia correct obviously, so at least you don't have that worry
Using middle of the road bend curve masts will enable you to use Severne and Tush on the same mast but it is not ideal. How far from ideal varies.
Pics of the sails rigged to spec would help a lot.
Why do you say severne too expensive? About the same as all the others...?


nerdycross
317 posts
25 Dec 2015 1:40AM
Thumbs Up

I can trade in my tush 460 in for a north platinum aero 460 %100 do you think this will be better for the 7 ncx? Have attached photo of the 6 ncx on my North viper 430 %100.



Tardy
5262 posts
25 Dec 2015 4:40AM
Thumbs Up

I don't think you'd solve much by changing the mast ..from tush to north for your 7.0
pic.yes you see how the looseness in the sail is in the middle not as much up top
where it should be.?its the constant curve mast ...my severne sails rig similar on the north
but that's how they loose power to quick ..they look great rigged...but ..they don't reach their full potential .
get a good Naish ..or severne ...mast on it and you will notice alot of difference ...



sboardcrazy
NSW, 8239 posts
25 Dec 2015 8:41AM
Thumbs Up

Last few years I've been using a sailworks 460 constant curve mast on my 7.5m Severne Overdrive. Everyone told me it wasn't rigging properly but I only had that mast. That sail died and I've since got a 7.8m OD with a Severne mast to suit .What a difference?
I used to get overpowered easily with the 7.5m ( 64kgs) whereas now I can hold the 7.8m in wind as strong , it's less effort, better balanced and much more fun!

nerdycross
317 posts
26 Dec 2015 4:21PM
Thumbs Up

I am naive to think it would be nice for the sail manufacturer to give not just the usual bull **** message that can only use their recommended mast for their sails but a list of alternative suppliers masts that would work (for them of us who have existing masts ) Gess that's not good business sense. And they wouldn't be able to rip us off with their recommended kit !

dextersurf
SA, 114 posts
26 Dec 2015 10:36PM
Thumbs Up

nerdycross said..
I am naive to think it would be nice for the sail manufacturer to give not just the usual bull **** message that can only use their recommended mast for their sails but a list of alternative suppliers masts that would work (for them of us who have existing masts )


Here are the recommendations from North Sails:
http://www.north-windsurf.com/eng/nodes/display/products/blacklabel-series

CC = CONSTANT CURVE
NorthSails bend-curve – compatible with Aerotech, Avanti Sails (SDM), Challenger Sails, Ezzy Sails, Gun Sails, KA Sails, Loft Sails, Maui Sails, Naish, Point 7, Sailloft, Sailworks, Severne, Simmer Style and XO Sails
HT = HARD TOP
Identical curve as GA (Gaastra) – compatible with Avanti Sails (RDM), F2 Sails and Vandal Sails
FT = PROGRESSIVE FLEX TOP
Identical curve as NeilPryde – compatible with Attitude Sails, Hot Sails and Tushingham

joe windsurf
1482 posts
26 Dec 2015 9:33PM
Thumbs Up

check out Unifiber - they have masts by year ( within last about 5 years )
which is good cuz Maui Sails are now Constant Curve ie changes occur !!



Subscribe
Reply

Forums > Windsurfing General


"carbon masts" started by nerdycross