Techno 295 parts dimensions

Hi all

I've got a possible little project coming up and I need some help from a Techno 295 person

Could you tell me the length of the mast track, the pivot to tip length of the centerboard and the maximum chord of the centerboard?

I believe these parts are readily available from Bic Sports?

Thanks
Geoff

If you mean Bic Techno 293 OD - then these may be useful.
I have attached photos as reference - but don't go by the measurements showing up in the photos - they are not accurate due to camera/lens foreshortening, perspective and curved surface of the centreboard.
Go by measurements below...

Mast Track Full (with the black plastic bits) = 472mm (measured from tip of curved plastic to outer edge of plastic stopper at the rear)
Mast Track Aluminum bit only = 448mm
Mast Track width = 40mm
Pivot to tip length of Centre board = 610mm (measured from centre of pin to tip of fin)
Chord = 104mm (at widest part immediately below the trailing edge curve at the top of the fin)
Hope this helps.