Looking for some advice on how to put on or change the pulleys from one sail to another. I recently bought a Mach 2 and found it has no pulleys when I went to rig it. If anyone know how to put pulleys on the sail please reply.
Take it to Jesper, he can weave his magic and get it sorted. take your extension as well and he may be able to set it up so the lines don't twist.
I dont know if this is what you are after but you can just slide the bar out and thread it through the webbing on the sail if it's still there.
Shannon.
www.surfsailaustralia.com.au/product/ezzy-stainless-tack-pulley
Select to expand quoteLachyP said..
Looking for some advice on how to put on or change the pulleys from one sail to another. I recently bought a Mach 2 and found it has no pulleys when I went to rig it. If anyone know how to put pulleys on the sail please reply.
If in WA you can also go to revolution boardsports in osborne park. They should be able to help you out.
Select to expand quoteshannon19 said..
I dont know if this is what you are after but you can just slide the bar out and thread it through the webbing on the sail if it's still there.
Shannon.
www.surfsailaustralia.com.au/product/ezzy-stainless-tack-pulley
That's the go, or you can get various pulley setups meant for just this problem.
I used a 3 pulley block that I got from Whitworths and it was a dream. Nice ball bearing pulleys so easier than normal.
