What's up wind folks? I tried threading the loop and go different ways but can't get a clean pattern like on the old school boom.
The result is the lines cross and they pop and cut prematurely.
Is there a trick to it? When I had a camera on the boom I remember seeing the line slide which was so cool, it was on a streamlined boom. It would cut through the carbon tail.
Now on the loop and go I think it doesn't slide easily and that's why the like end up crossing. I can see that when releasing the outhaul too.
The line start coming out of the boom at an angle is the one getting worn out fast.
I use formuline on my boom both head and tail (usually one that has worn the ends from being used as a dh). I doubt it'll wear out before the boom breaks in the next decade. It'll definitely outlast the grip.
It'll help handle the friction, I think the lines cross because the angle going from one side to the other is too wide as opposed to be more parallel.
I think that it is more of an issue with a single eyelet as compared to when there are two and one can thread it the classical way, using both eyelets.
A better rope will however reduce both the friction and the wear.
Exactly! I used to have a neilpryde with 2 eyelets and used both, I liked it this way.
Coincidentally, I received a Goya sail with 2 eyelets and I'll be able to do the same, cool.
Goya mentioned it in their booklet.
The one thing is eyelets are offset on the Goya, they weren't on the neilpryde.
Anyway, will test it out and report.
