Forums > Windsurfing Foiling

Slingshot Wizard 125 Foot strap position

Reply
Created by owain > 9 months ago, 19 Feb 2020
owain
NSW, 228 posts
19 Feb 2020 8:41PM
Thumbs Up

Hi all,
I just received my 2020 Wizard 125 & Hover Glide FWind V3 and am preparing for my first foiling session (never foiled in my life).

Can anyone recommend a good starting foot strap position? From what I have researched a good starting position is front strap all the way forward and rear strap at the mid point.

Does this sound reasonable or can any Wizard owners share their experience?

I will be sailing a 5.8 (only sail) & I am around 70kgs.

Windbot
508 posts
19 Feb 2020 11:47PM
Thumbs Up

Wizard 125 owner here. I would just start with the front straps only, the rears just get in the way at the start. I would go with the second most forward holes to start then adjust as needed. Which wing are you using? You are going to love this thing.

KDog
361 posts
20 Feb 2020 2:44AM
Thumbs Up

From the start I always had my front straps in the full forward position. You can leave the back straps off or put them in the third or full rear then you use them for a reference for your back foot it takes some time to feel comfortable putting your back in the straps.Set your mast track at what slingshot recommends.125 wizard fun board happy foiling!

CoreAS
923 posts
20 Feb 2020 3:30AM
Thumbs Up

2nd hole from the front on both front and rear straps.

Mast base - center of UJ to center of front foil bolt between 41 1/4 to 41 3/4" (but experiment for you)



owain
NSW, 228 posts
20 Feb 2020 8:23AM
Thumbs Up

Select to expand quote
Windbot said..
Wizard 125 owner here. I would just start with the front straps only, the rears just get in the way at the start. I would go with the second most forward holes to start then adjust as needed. Which wing are you using? You are going to love this thing.


OK noted, seems to be roughly the consensus.

I have the Infinity 76 and a 91cm & 65cm mast. I am tempted to do my first run on the 91cm mast but maybe I am too confident.

hardpole
WA, 604 posts
20 Feb 2020 7:24AM
Thumbs Up

Same setup here. About 8 sessions so far, still using the 65 but thinking of the 91 soon. Footstraps forward. Amazing how the foil just flies once you are in or on the front strap. As above back strap just for reference so far.

Loving it.

MagicRide
688 posts
20 Feb 2020 7:47AM
Thumbs Up

I bypassed all shorter masts and went for the 90 cm mast. Gives me more time in flight to figure things out so I won't breach the foil as easily.

owain
NSW, 228 posts
20 Feb 2020 2:18PM
Thumbs Up

As I have never brought a new board I actually don't know which holes are paired?

Am I right in saying the matching holes as nicely drawn below?

I did eyeball the straps using this configuration but It honestly didn't look correct, maybe this is just because the straps are brand new.

MagicRide
688 posts
20 Feb 2020 11:30AM
Thumbs Up

What I don't get is why the back hole to attach the foil to board is so off center inside the oval? It makes it almost impossible to start hand threading the bolt into the tuttle head. The front hole is more center in the oval but still not center. That was my initial issue with trying to hand thread the rear bolt. All slingshot would have to do is cut the oval center where both bolts would need to be inserted, and drill the hole into the finbox accordingly. It would definitely make assembling foil to board much more convenient, especially with us guys with larger fingers.

owain
NSW, 228 posts
20 Feb 2020 2:41PM
Thumbs Up

Select to expand quote
MagicRide said..
What I don't get is why the back hole to attach the foil to board is so off center inside the oval? It makes it almost impossible to start hand threading the bolt into the tuttle head. The front hole is more center in the oval but still not center. That was my initial issue with trying to hand thread the rear bolt. All slingshot would have to do is cut the oval center where both bolts would need to be inserted, and drill the hole into the finbox accordingly. It would definitely make assembling foil to board much more convenient, especially with us guys with larger fingers.


Hmm, right you are. I did read your thread so will be mindful of such an event. I am also planning to replace all of the bolts/screws with quality stainless fasteners (hopefully before my first session).

owain
NSW, 228 posts
20 Feb 2020 2:53PM
Thumbs Up

@MagicRide on your point, are you meant to use washers and if so, it doesn't seem like there is a lot of room...

azymuth
WA, 2154 posts
20 Feb 2020 12:16PM
Thumbs Up

Select to expand quote
hardpole said..
Same setup here. About 8 sessions so far, still using the 65 but thinking of the 91 soon. Footstraps forward. Amazing how the foil just flies once you are in or on the front strap. As above back strap just for reference so far.

Loving it.


Stoked that you're frothing Jeff - how much fun is it when you get those long glides

You'll find it easier to maintain height with the 91 mast.


Thomas Hofmann (the drone king) is addicted too - also about 8 sessions in

2keen
WA, 372 posts
20 Feb 2020 6:44PM
Thumbs Up

Owain, Set up your straps as you have drawn in your photo to begin, You may want to move them later maybe not.
Use the washers provided to secure the bolts through the box into the tuttle head. Place the bolt in the T piece and gently spin with your fingers ensuring the Flange is flat on the bottom of the board. I have used this technique hundreds of times without cross threading.
Hope you have as much fun learning as I did. Two years on and still looking forward to my next session.

dejavu
825 posts
23 Feb 2020 8:33AM
Thumbs Up

Here's what I would do if I could start over:

1) front straps only and in the most forward position;

2) have a nose protector in place;

3) put your mast foot on the deck well forward so it will be difficult to lift off. This way you will just get a taste of flying low (practice taxiing around before taking hard flight). When you get some confidence move the mast foot back little by little in the tract until you find a balanced position for the wind strength you are up and foiling in;

4) I would start with the shorter mast -- any breaches will be less dramatic from less height. It is true that a taller mast will give you more response time to make adjustments but for now you don't have a clue how to make weight adjustments so start safe;

5) If you've windsurfed with a fin then you should know how to pump the sail and board. Put your front foot in the front strap and pump the board so you can get some speed and some feel for how the foil is reacting to your weight as you start to move it back to get the board to lift a little;

6) Have some patience. With practice you will learn to make micro adjustments moving your weight forward and back to obtain level flight;

7) Don't be afraid to tune your board for the conditions -- move the mast position forward if you are breaching too much and back a little if you can't get off the water.

8) Remember, Rome wasn't built in a day!

9) If you follow the above advice you can most likely avoid my fate -- being a crash test dummy.

owain
NSW, 228 posts
24 Feb 2020 10:21PM
Thumbs Up

Duly noted @dejavu. First flight is planned for tomorrow. All advice has been taken on board and now it is in my hands.
A GoPro will be documenting this .



Subscribe
Reply

Forums > Windsurfing Foiling


"Slingshot Wizard 125 Foot strap position" started by owain