Any recommendations for a repairer who can fix up this? Can it even be fixed??
Can rant repairers on here tell me if I'm just wasting my time getting this repaired?
Has carbon stringer up the middle and the two sides at the bottom. Not snapped all the way through, still together at the bottom,. It's epoxy/eps foam if that matters...-sigh-
That's a throwaway for me. But you could try katana off these forums. Or there are a few other recommendations if you search. But yeah, in the bin. It would never be the same.
Select to expand quoteLegion said..
That's a throwaway for me. But you could try katana off these forums. Or there are a few other recommendations if you search. But yeah, in the bin. It would never be the same.
What he said....you can get it fixed but it won't ride the same any more
I thought it's gonna be a thrower, just wondering if anybody had ever had a snapped board repaired and surfed it again..how come epoxy + carbon = 
(apart from this pic as an example!)
This happened after taking the day off to head down south and 30 mins in the water! Then dragged over the reef getting out. Not meant to be my day! 6 hours driving for 30 mins surf and a snapped board! Yeah thanks life!
Last time I went down I went down south I got a puncture in the bloody car park! Bad luck in threes? Arrrr sh1t what's next..
i had repaired a Stretch epoxy.....very similar snap to yours. Repair looked amazing couldn't tell the difference, but it did snap pretty much second or third session after, a couple of cm's down from original repair.
Select to expand quotePhil27 said..
I thought it's gonna be a thrower, just wondering if anybody had ever had a snapped board repaired and surfed it again..how come epoxy + carbon = (apart from this pic as an example!)
This happened after taking the day off to head down south and 30 mins in the water! Then dragged over the reef getting out. Not meant to be my day! 6 hours driving for 30 mins surf and a snapped board! Yeah thanks life!
Last time I went down I went down south I got a puncture in the bloody car park! Bad luck in threes? Arrrr sh1t what's next..
Its a shame it broke in that spot, further up would have been a bit more ideal for a repair. Bugger of a day by the sounds 
Pitty as JR makes a nice board
Select to expand quotemarkass said..
i had repaired a Stretch epoxy.....very similar snap to yours. Repair looked amazing couldn't tell the difference, but it did snap pretty much second or third session after, a couple of cm's down from original repair.
As a grom I was learning board repair, working in a surf shop.
Fixed my first snap, new paint and all. This was my board, not a customer's. Snapped it again first surf back, a couple of inches below the original snap.
Never bothered again.
fix it yourself for a project and then give it to a grom. It looks like a good clean snap so it will not be too difficult a job. As others have said there is a good chance it will snap again but it may not for a while and in that time it might bring a whole world of joy to someone else 
Nice idea Ted, always good to give and I something worth considering..
Had a plan to get it roughly repaired, spray some cool artwork on it and hang on the wall, maybe a painting of lefthanders - where I did it..
^+1 new recruit for a learner....Worst spot to snap a board...I've never kept a board after its snapped, its always been in the same area. If not multiple snapageez from some brutal SW beatings.
Maybe a good place to start picking up another board
This weekend, the Star Surf + Skate Warehouse in Osborne Park (rear unit 7, 443 Scarborough Beach Rd) will be holding a
MASSIVE SURFBOARD CLEARANCE SALE!
The sale kicks off at 9:00am Saturday morning. We will have performance shortboards, grovellers, fish surfboards, big-guy boards, Malibus, Mini-mals, Simmons replicas and pretty much everything in between!
We will be open 9:00 to 5:00 on Saturday April 5 and 11:00 to 5:00 on Sunday April 6.
Yeah Darth, that board was sweet - best Ive had and have enquired about the grinder max..a new design that looks to suit me but with a few dimension tweaks on the 6'1, JR are pretty cool to talk to.
They didnt mention this but if you look closely on the pic of my board there is some aluminium tape on it where I cracked it slightly from a failed pig dog attempt and got smashed, never got it repaired and thats where the crease and eventual crack started yesterday - the weak spot. If I wasnt so lazy and got it repaired properly this may never have happened..lesson learned!
Jb - I actually phoned the Perth shop y.day as when I popped in the other week they had offers on JS boards but the offer has now expired. They told me about that tomorrow saying doors open at 11am so Im glad you gave me the heads up for 9am. Proably members first?..
Might even see you there!
Select to expand quotePhil27 said..
Yeah Darth, that board was sweet - best Ive had and have enquired about the grinder max..a new design that looks to suit me but with a few dimension tweaks on the 6'1, JR are pretty cool to talk to.
They didnt mention this but if you look closely on the pic of my board there is some aluminium tape on it where I cracked it slightly from a failed pig dog attempt and got smashed, never got it repaired and thats where the crease and eventual crack started yesterday - the weak spot. If I wasnt so lazy and got it repaired properly this may never have happened..lesson learned!
Jb - I actually phoned the Perth shop y.day as when I popped in the other week they had offers on JS boards but the offer has now expired. They told me about that tomorrow saying doors open at 11am so Im glad you gave me the heads up for 9am. Proably members first?..
Might even see you there!
My next board will be a Scud..I think
I wish i could make up my mind..
Yeah I'll fix it. I'm kind of busy just now but I've got a few tricks up my sleeve.
Select to expand quotebjshack said..
My next board will be a Scud..I think I wish i could make up my mind..
I think Dave only makes them up to 7'0". You might have to get him to make you a custom.
Select to expand quoteLegion said..bjshack said..
My next board will be a Scud..I think I wish i could make up my mind..
I think Dave only makes them up to 7'0". You might have to get him to make you a custom.
And you'd know wouldn't you..
That size would be great in Your Cottesloe pool..
Select to expand quotebjshack said..
And you'd know wouldn't you..
Well, I looked up the board model on his website, if that's what you mean
If I was getting one it would be about 5'8" x 19". I was extrapolating to your measurements.
Select to expand quoteLegion said..bjshack said..
And you'd know wouldn't you..
Well, I looked up the board model on his website, if that's what you mean If I was getting one it would be about 5'8" x 19". I was extrapolating to your measurements.
For some one who claims to be the next KS you are very quiet about anything other than advise and ridicule
Select to expand quotejbshack said...
Maybe a good place to start picking up another board
This weekend, the Star Surf + Skate Warehouse in Osborne Park (rear unit 7, 443 Scarborough Beach Rd) will be holding a
MASSIVE SURFBOARD CLEARANCE SALE!
The sale kicks off at 9:00am Saturday morning. We will have performance shortboards, grovellers, fish surfboards, big-guy boards, Malibus, Mini-mals, Simmons replicas and pretty much everything in between!
We will be open 9:00 to 5:00 on Saturday April 5 and 11:00 to 5:00 on Sunday April 6.
Just paid 299 for a retro 6'4
They had mini Simmons for 399
Some rusty and s boards for 550
Had to cut myself off
Select to expand quotebjshack said..
For some one who claims to be the next KS you are very quiet about anything other than advise and ridicule
Huh? I'm a kook, ask doggie.
And I was just trying to help you add to your quiver of 50L boards. You're hurting my feelings with your spiteful tone
