Forums > Surfing Longboarding

Greg Laurenson 9'2" Longboard advice

Reply
Created by dbmgreen > 9 months ago, 24 Apr 2017
dbmgreen
NSW, 27 posts
24 Apr 2017 10:42PM
Thumbs Up

Hi All,

Just before GL left Perth on his yacht for Tasmania, one of the last boards he shaped was a traditional 9'2" longboard for me. He used his original templates for this board, which was finished for me unglossed.

A bit of background, GL used to shape windsurfers for me, and I had moved to Sydney where the windsurfing is basically ****, so I thought I would take up surfing.

Long story short, I tried surfing on it maybe twice, but didn't really have the time to learn. So its been sitting in my garage inside the original board bag for the best part of 20 years, the glass is a little yellowed, but there are really no other blemishes on it.

I think its time to sell it, but don't want to gumtree it. It is in Sydney, and I think it would be better off in Perth with an enthusiast. Anyone care to offer a suggestion as to what it might be worth, and other than here where should I advertise it?

Thanks in advance for any info.

Cheers
Dave Green

dbmgreen
NSW, 27 posts
25 Apr 2017 2:21PM
Thumbs Up


















Purple was GLs nick name for me. 1198 was the board number i.e.: number he had shaped. Then you have nose tail widths etc on the stringer.






P co
WA, 458 posts
25 Apr 2017 7:54PM
Thumbs Up

Fantastic looking board. I would love to have a ride on that, Greg was a great local shaper, I haven't seen any recent longboards of his, I got one real old transition era midsize as well as one or two other single fins and twins. Drop me a message if you can't find a buyer. Cheers Ross

RichardG
WA, 3758 posts
30 Apr 2017 12:38AM
Thumbs Up

Hi Dave, I remember you from windsurfing in Perth in the 1980s and you were a great sailor back then. I recall reading in the paper you participated in the Rip Curl Wave Classic in Torquay and did very well. If you have any video or shots of the event please share of those days.

I have several longboards (Bing Pintail 9'8", Almond Lumberjack 9'8") and recently have sold a vintage 1964 Cordingley 9'8" on this site and fetched a good price for it.

Your board looks nice and Greg Laurenson was a great WA shaper.

It looks like a hybrid design that is I am not sure if it has the full rolled bottom and rails of a traditional longboard nor does it unless I am mistaken have volane glass layup. As you may know, a lot has moved on in 20 years and traditional longboards are now in themselves a cult genre and have a strong following and there are many manufacturers and excellent shapers out there both in Australia and the USA. Also original 1960s boards attract higher prices but a 20 year old board is more problematic to value. The concept of a traditional style board of 20 years ago is less traditional than todays noserider or involvement model for example.

Without knowing too much about the precise board I would suggest around or anywhere upwards of $900 would be a good price. It could be worth more but I do not know.

You may want to try Soul Surf in Sydney as they may be able to give you a better valuation and ideas..they list boards on their website which are good for collectors but a problem maybe they may not know of Greg but it is a site that is looked at by enthusiasts around the place.

www.soulsurf.com.au/

I understand that owner of Vidler surf in Cottesloe collects boards and you may want to enquire with him.

Best Wishes,

Richard

Macaha
QLD, 21976 posts
30 Apr 2017 5:04AM
Thumbs Up

RichardG said..
Hi Dave, I remember you from windsurfing in Perth in the 1980s and you were a great sailor back then. I recall reading in the paper you participated in the Rip Curl Wave Classic in Torquay and did very well. If you have any video or shots of the event please share of those days.

I have several longboards (Bing Pintail 9'8", Almond Lumberjack 9'8") and recently have sold a vintage 1964 Cordingley 9'8" on this site and fetched a good price for it.

Your board looks nice and Greg Laurenson was a great WA shaper.

It looks like a hybrid design that is I am not sure if it has the full rolled bottom and rails of a traditional longboard nor does it unless I am mistaken have volane glass layup. As you may know, a lot has moved on in 20 years and traditional longboards are now in themselves a cult genre and have a strong following and there are many manufacturers and excellent shapers out there both in Australia and the USA. Also original 1960s boards attract higher prices but a 20 year old board is more problematic to value. The concept of a traditional style board of 20 years ago is less traditional than todays noserider or involvement model for example.

Without knowing too much about the precise board I would suggest around or anywhere upwards of $900 would be a good price. It could be worth more but I do not know.

You may want to try Soul Surf in Sydney as they may be able to give you a better valuation and ideas..they list boards on their website which are good for collectors but a problem maybe they may not know of Greg but it is a site that is looked at by enthusiasts around the place.

www.soulsurf.com.au/

I understand that owner of Vidler surf in Cottesloe collects boards and you may want to enquire with him.

Best Wishes,

Richard


Great post,now how about you show us your Bing and Almond boards please.

dbmgreen
NSW, 27 posts
1 May 2017 3:49PM
Thumbs Up

RichardG said..
Hi Dave, I remember you from windsurfing in Perth in the 1980s and you were a great sailor back then. I recall reading in the paper you participated in the Rip Curl Wave Classic in Torquay and did very well. If you have any video or shots of the event please share of those days.

I have several longboards (Bing Pintail 9'8", Almond Lumberjack 9'8") and recently have sold a vintage 1964 Cordingley 9'8" on this site and fetched a good price for it.

Your board looks nice and Greg Laurenson was a great WA shaper.

It looks like a hybrid design that is I am not sure if it has the full rolled bottom and rails of a traditional longboard nor does it unless I am mistaken have volane glass layup. As you may know, a lot has moved on in 20 years and traditional longboards are now in themselves a cult genre and have a strong following and there are many manufacturers and excellent shapers out there both in Australia and the USA. Also original 1960s boards attract higher prices but a 20 year old board is more problematic to value. The concept of a traditional style board of 20 years ago is less traditional than todays noserider or involvement model for example.

Without knowing too much about the precise board I would suggest around or anywhere upwards of $900 would be a good price. It could be worth more but I do not know.

You may want to try Soul Surf in Sydney as they may be able to give you a better valuation and ideas..they list boards on their website which are good for collectors but a problem maybe they may not know of Greg but it is a site that is looked at by enthusiasts around the place.

www.soulsurf.com.au/

I understand that owner of Vidler surf in Cottesloe collects boards and you may want to enquire with him.

Best Wishes,

Richard



Hi Richard,

Thanks for takingthe time to answer, no I wasn't specifically aware of the nuances perhaps of using the word traditional :) I doubt the glass is Volane, the board is not heavy enough, I used to do a bit of work in Gregs factory way back when, and we did occaisionally use Volane under the footstraps on his boards.

I guess traditional is more the shape and the templates he used for this, they we original from before he made short boards.

I probably do have a couple of photos of the Rip Curl, I seem to recall taking Photos of Robbie rigging up one day and all of us playing volleyball over a next supported by booms. Let me take a look. I shared some photos of the 1984 Worlds with the Wally guys over here recently. i will see what I have. Unfortunately the video app on my cell phone wasn't quite developed enough at that point to record and save video :)

I still have the full VHS from which this short clip was taken......
and I believe the TV series "The Wonder of Western Australia" is archived and has footage of WA sailboarders as well.

RichardG
WA, 3758 posts
3 May 2017 5:39PM
Thumbs Up

dbmgreen said..

RichardG said..
Hi Dave, I remember you from windsurfing in Perth in the 1980s and you were a great sailor back then. I recall reading in the paper you participated in the Rip Curl Wave Classic in Torquay and did very well. If you have any video or shots of the event please share of those days.

I have several longboards (Bing Pintail 9'8", Almond Lumberjack 9'8") and recently have sold a vintage 1964 Cordingley 9'8" on this site and fetched a good price for it.

Your board looks nice and Greg Laurenson was a great WA shaper.

It looks like a hybrid design that is I am not sure if it has the full rolled bottom and rails of a traditional longboard nor does it unless I am mistaken have volane glass layup. As you may know, a lot has moved on in 20 years and traditional longboards are now in themselves a cult genre and have a strong following and there are many manufacturers and excellent shapers out there both in Australia and the USA. Also original 1960s boards attract higher prices but a 20 year old board is more problematic to value. The concept of a traditional style board of 20 years ago is less traditional than todays noserider or involvement model for example.

Without knowing too much about the precise board I would suggest around or anywhere upwards of $900 would be a good price. It could be worth more but I do not know.

You may want to try Soul Surf in Sydney as they may be able to give you a better valuation and ideas..they list boards on their website which are good for collectors but a problem maybe they may not know of Greg but it is a site that is looked at by enthusiasts around the place.

www.soulsurf.com.au/

I understand that owner of Vidler surf in Cottesloe collects boards and you may want to enquire with him.

Best Wishes,

Richard




Hi Richard,

Thanks for takingthe time to answer, no I wasn't specifically aware of the nuances perhaps of using the word traditional :) I doubt the glass is Volane, the board is not heavy enough, I used to do a bit of work in Gregs factory way back when, and we did occaisionally use Volane under the footstraps on his boards.

I guess traditional is more the shape and the templates he used for this, they we original from before he made short boards.

I probably do have a couple of photos of the Rip Curl, I seem to recall taking Photos of Robbie rigging up one day and all of us playing volleyball over a next supported by booms. Let me take a look. I shared some photos of the 1984 Worlds with the Wally guys over here recently. i will see what I have. Unfortunately the video app on my cell phone wasn't quite developed enough at that point to record and save video :)

I still have the full VHS from which this short clip was taken......
and I believe the TV series "The Wonder of Western Australia" is archived and has footage of WA sailboarders as well.


Thanks Dave. Why dont you post it in the Windsurfing area of seabreeze. I would like to get a copy of the WindWarriors video. Any chance you are going to convert it to a digital format assuming that the owners permit that to be done. I do not believe it can be purchased anywhere. Cheers Richard

RichardG
WA, 3758 posts
3 May 2017 5:40PM
Thumbs Up

Macaha said..

RichardG said..
Hi Dave, I remember you from windsurfing in Perth in the 1980s and you were a great sailor back then. I recall reading in the paper you participated in the Rip Curl Wave Classic in Torquay and did very well. If you have any video or shots of the event please share of those days.

I have several longboards (Bing Pintail 9'8", Almond Lumberjack 9'8") and recently have sold a vintage 1964 Cordingley 9'8" on this site and fetched a good price for it.

Your board looks nice and Greg Laurenson was a great WA shaper.

It looks like a hybrid design that is I am not sure if it has the full rolled bottom and rails of a traditional longboard nor does it unless I am mistaken have volane glass layup. As you may know, a lot has moved on in 20 years and traditional longboards are now in themselves a cult genre and have a strong following and there are many manufacturers and excellent shapers out there both in Australia and the USA. Also original 1960s boards attract higher prices but a 20 year old board is more problematic to value. The concept of a traditional style board of 20 years ago is less traditional than todays noserider or involvement model for example.

Without knowing too much about the precise board I would suggest around or anywhere upwards of $900 would be a good price. It could be worth more but I do not know.

You may want to try Soul Surf in Sydney as they may be able to give you a better valuation and ideas..they list boards on their website which are good for collectors but a problem maybe they may not know of Greg but it is a site that is looked at by enthusiasts around the place.

www.soulsurf.com.au/

I understand that owner of Vidler surf in Cottesloe collects boards and you may want to enquire with him.

Best Wishes,

Richard



Great post,now how about you show us your Bing and Almond boards please.


Yes I will post some photos shortly



Subscribe
Reply

Forums > Surfing Longboarding


"Greg Laurenson 9'2" Longboard advice" started by dbmgreen