It's 6oz glass covered with PVC. My plan is to fill the void beneath the skin with epoxy and EPS balls from a fruit box, then sand the PVC off and glass a patch over the lot. Any suggestions from those more knowledgeable than myself?
Select to expand quotebeerdead said..
It's 6oz glass covered with PVC. My plan is to fill the void beneath the skin with epoxy and EPS balls from a fruit box, then sand the PVC off and glass a patch over the lot. Any suggestions from those more knowledgeable than myself?
I have done it. The EPS ball trick works wonder, and you only have to "wet" them with very little epoxy to get a result. It then is easily worked with an exacto knife.See: www.gong-galaxy.com/forum/viewtopic.php?p=54729#p54729
I would suggest leaving some room on top of it for a layer of epoxy + microspheres for waterproofness.
Another way is to prepare a very light epoxy + microspheres mix (1 to 7 in volume, 1 to 1 in weight), and add some "glue" additive to get a very light paste that is very easy to work with and apply, and becomes quite hard, so is very easy to sand... I just fixed my toilet plumbing that was in a very tight space this way :-)Others would advice whipping some gorilla glue with water, but I have no experience with it.
