My 18 month old Fanatic adjustable carbon paddle blade has developed a bubble near the tip. About 8 sq.cm. and 8mm thick, but not getting much bigger. The paddle has been lightly used. From other glass work I have done it looks like contamination or a flaw has allowed the surfaces to separate. About to split the bubble, inject West GFlex epoxy and clamp it up lightly unless there is a better way?
The paddle has never been in heat and is stored in a soft cover indoors.
probably been stored wet in the cover, with imperfections in the layup at the tip, allowing moisture in. add to that the Qld humidity, and you've got a bubble.
Melbourne weather comparison at the moment is water temp of 11c, air temp of 13c, with a s/w breeze straight from the Antarctic.
I should have such problems as yours
Select to expand quoteHelmy said..
probably been stored wet in the cover, with imperfections in the layup at the tip, allowing moisture in. add to that the Qld humidity, and you've got a bubble.
Melbourne weather comparison at the moment is water temp of 11c, air temp of 13c, with a s/w breeze straight from the Antarctic.
I should have such problems as yours
Tomoz i'll b in the five four ! hood on and trying to enjoy that 11 c temp ! The wind is goin to back off and swell 4-6 feet ! Locals only ! Apparently ! Government says so ! ??
