thinking about custom 3 board sup rack for small japanese saloon......anyone done a custom rack using front and rear ends bolted to vehicle chassis......rather than using all that flimsy gutter mount stuff?
I rivetted some tracks from rola to the roof of my camry, they work good.
www.rhinorack.com.au/products/roof-rack-parts/tracks
I have installed roll cages in cars which attached to the chassis, definitely possible to go from the chassis up through the roof but it would be an ugly job.
Select to expand quotetowball said..
There is some clever people around with some good ideas 
That was one of my "good ideas"
I also note the "porridge saucepan".......essential early morning surf equipment.
Are we allowed to drill holes through our car roofs or door pillars to attach anchor points for board attachments?
.....And also it seems I am no longer permitted to make comments about "sunday afternoon phone calls"......my post has vanished
How can a post about sunday afternoon phone calls be considered detrimental to general sup morale and protocol?
was looking at kanulock straps......all very good having tuff straps....but if they just attached to roof rack that has dubious attachment points.....its all just going to blow off in a big gust of wind if you got 2 or 3 boards on top
That's why i would like to drill holes and put bolt type anchor points through the car body itself
Nothing in the rule book to so you can't drill holes .
dont forget the silicone ,for a good down pour .
Stainless bolts for salt water.....go for it 
yeah you would think it would be okay.......rubber bushes......big hefty washers on the inside
And a little bit of silicon on the bolt to be sure to be sure .laddie.
make sure you measure .before drilling ...you don't want a siv for a roof .
and don't take out your interior light .
Ive never drilled a wrong hole in my life whoops .
it s a custom .
