Anybody out there no if the thread insert on boards can be replaced or repaird.
The screw on one of my straps came out and stript the thread at the same time.
Any sagestions would be much apreciated I have allready moved the straps in to the next holes but it feeals a bit to close together.
Hey Benny G, you may be able to drill the insert out a little, run a Bottoming tap into the insert and insert a helicoil to the original thread size.
Speak to an engineering workshop, they should be able to do it for you for stuff all. It only takes about 5 minutes to inser a new helicoil.
Good winds,
Drill through the board and use a coach bolt and nylock nut on the upside, approx $1.
