Forums > Kitesurfing General

slingshot rally 2012.leading edge splitting

Reply
Created by antennaeman > 9 months ago, 6 Nov 2012
antennaeman
NSW, 2 posts
6 Nov 2012 7:36PM
Thumbs Up

has anyone else had trouble with their leading edge splitting at the centre attachment points which then allows the bladder to exit the split and pop..my mate and i have 2012 10m rally kites which have both split on both sides of both kites in exactly the same place.seems to be a weakness in the design'

dave......
WA, 2119 posts
6 Nov 2012 4:41PM
Thumbs Up

Hs the stching undone or has the leading edge material "ripped" where the stiching is? Get a photo and do a warranty claim to SS online if the shop you bought it from gives you no joy.

antennaeman
NSW, 2 posts
6 Nov 2012 8:03PM
Thumbs Up

The material has split at right angles to the length of the leading edge. In all four cases there has been two tears about a centimetre apart. No problems with the stitching.

TurtleHunter
WA, 1675 posts
6 Nov 2012 7:04PM
Thumbs Up

Jeez thats a bit of a coincidence. Contact ss first but repairs are pretty straight forward. I have seen a similar thing a few years ago with a different brand but we had 4 new kites all the same explode while sitting on the beach. Turns out there were razor shells just under the surface of the sand. Funny thing was my c kites sat there longer and never had a problem.



Subscribe
Reply

Forums > Kitesurfing General


"slingshot rally 2012.leading edge splitting" started by antennaeman