After a new snorkel after my old (and cheap) one disintegrated in the water at Rotto.
I know virtually nothing on the subject. What should I look for? Has anyone seen any great deals (in Perth).
Don't want to spend more than $150 and ideally less than $100. And if I can get flippers for that then great.
(I've also got a big head)
The Dive shop on the North side of Hillary's Boat Harbour sorted us out years ago - like 10yrs ago. We snorkel reasonably often and all our gear is still going strong. Don't recall paying stupid money either - but did not get flippers - we just use the cheapy sets of flippers - but go a good mask and snorkel - as you don't want leaks in either.
Snorkel tech is flatlining the last 50 years, will you be using a mask with your snorkel its advisable.
Pro tip shave your Mo clean for a nice seal.
Could try something different?
www.amazon.com.au/Rockpals-180%C2%B0Panoramic-Breathing-Adjustable-Snorkeling/dp/B07458PCLS/ref=lp_5044547051_1_1?s=sporting-goods&ie=UTF8&qid=1512970242&sr=1-1
Assume you mean with the mask, otherwise at $150 you are looking at some pretty high end snorkles...
Go and check out dive superstore on Scarborough Beach Rd, got some decent sets in there at reasonable prices.
Always wondered if a 5 odd Meter length ,flexi type tube going to the surface would work to extend snorkelling depths ??
But not going to these clunky extremes ( although pretty cool )
p.s I have no real advice on the question
Always wondered if a 5 odd Meter length ,flexi type tube going to the surface would work to extend snorkelling depths ??
Nope. Physiological dead air. You only shift the amount of air in your lungs, so normal snorkling is about 600ml. thats why snorkles are only a standard length; otherwise you will be breathing only your exhaled air..........
Sounds about right, Figured the tube diameter might collapse too.. Well that just saved me going to the shed Thx Julian
Select to expand quoteJulianRoss said..
Always wondered if a 5 odd Meter length ,flexi type tube going to the surface would work to extend snorkelling depths ??
Nope. Physiological dead air. You only shift the amount of air in your lungs, so normal snorkling is about 600ml. thats why snorkles are only a standard length; otherwise you will be breathing only your exhaled air..........
The bigger reason is the pressure on your chest prevents you from sucking in air at atmospheric pressure from the surface (you could get round the dead air issue with an exhaust valve).
Whatever you do remember to tow a float and fly a blue / white, yellow, red and ...
**** it - just tow a tinny and fly a friggin' great big rainbow flag or nicephotog will shot you with his bow and arrow
Select to expand quoteMikeyG said..
Snorkel advice
Yeah don't bend them. No matter how the vote went.
Bet you this guy nearly swallowed his mask and snorkle and had to breath through his arse just to make them work properly again.
Got a good set from the guys at the dive shop on the foreshore at Rockingham earlier in the year.... great blokes to deal with and they didn't try and sell me gold plated when I was only after just better than budget! All the gear there too....
You can buy mask, fins and snorkel, all for under $50 US. There's nothing to a basic snorkel (bent tube with a mouthpiece). Mask is all about fit. You have to try them on and one that sticks by pressing on (no straps) and stays on for 4 + seconds without sucking in through your nose is a good fit. Standard shoe fins (non adjustable) work great, just wear some running socks to prevent blisters. Keep it simple.
Companies try to come up with something new for marketing, but there has been little improvement in the last 50 yrs, at least for the recreational snorkeler.
If your dive mask is made from clear rubber, the rubber snorkel must be made from the same stuff.
Many masks are made from black rubber, which require a black snorkel,,,,,,,,,,,, don't laugh.
If you combine a clear mask with a black snorkel, where they touch each other, they will disintegrate each other, something about the chemical make up of the two different kinds of rubber, they don't like each other.
The rubber materials must match, but I don't think that applies to plastic.
